The combi sensor serves for the measurement of the wind speed, brightness dawn and rain. The brightness can be measured for three directions, south, east and west, separately. It will be connected directly to the weather station which evaluates the measured data. The combi sensor requires an external 24 V AC supply (Power supply WSSV 10).
The combi sensor needs 24 V AC for operation. The necessary power can be supplied by the power supply unit ref.-no.: WSSV 10.

 

Technical data
Power supply
	Sensor unit (incl. heating):	AC 24 V ~ ± 15 %, 50/60 Hz
	Max. power consumption:	600 mA
Connection
	Connection cable:	LiYCY, 6 x 0.25 mm2, shielded
	Length:	10 m, max. 50 m
Ambient conditions
	Ambient temperature:	–40 ... +60 °C (ice free)
	Storage/transport temperature:	–40 ... +60 °C
	Humidity:	outside the building
Housing
	Protection level:	IP 55 in position for use acc. to EN 60 529
	Protection class:	III
	Dimensions (Ø x H):	130 x ca. 200 mm (without mounting bracket)
	Mounting:	mounting bracket for wall or mast
	Weight:	approx. 330 g (without mounting bracket)
Sensor signals:
Wind sensor
	Measuring range:	approx. 1 ... 40 m/s
	Accuracy:	≤ 0.5 m/s, –20 ... +60 °C
Precipitation sensor
	Measuring range:	precipitation yes / no
	Sensitivity:	fine drizzle
	Switch-on delay:	approx. 3 rain particles
	Switch-off delay:	approx. 2 min
Brightness sensors
	Measuring range:	approx. 1 ... 110 klx
	Spectral range:	approx. 700 ... 1050 nm
	Direction:	east, south, west
Twilight sensor
	Measuring range:	approx. 0 ... 674 lx