Supply voltage 230 V.

The scope of supply includes a frame R, an intermediate frame ZR in the same colour and

a mounting plate. In addition, an intermediate frame ZRF in the same colour is supplied for

installation in an existing frame R1F, R2F or R3F for flat pushbuttons.

Since all LED displays can be taught in individually or together, universal displays are possible.

Up to 4 sensors can be taught-in in an LED display.

Position display with single LED

The numbered LEDs can be taught in individually to indicate the position of up to 10 windows,

doors, roller shutters, shading elements and lights as well as for room surveillance with FBH.

Either with window/door contacts, Hoppe window handles, relay outputs, motion detectors or

the new bidirectional actuators with switch position feedback. In addition, wireless pushbuttons

and hand-held transmitters can be taught-in.

A light sensor

controls the brightness of the LEDs depending on the ambient brightness.

In addition, the small rotary switch underneath the LEDs influence the automatic brightness

control: starting from middle position, turn to the left = darker, turn to the right = brighter.

Automatic control is switched off in the end positions.

Call signals with all LEDs

Two different call signals can be taught in: 'all LEDs blinking simultaneously'

and 'all LEDs flowing in a circle'. If both light alerts occur simultaneously,

then the two semicircles blink alternately.

A time delay

can also be taught in using these call signals in order to

display a short door bell contact for a long time, for example.

Acknowledge light call signals

If a call is initiated via a wireless transmitter FMH2S-wr on the carry

strap, the call can be cleared by a wireless pushbutton taught-in as an

'acknowledgement button'.

The mini hand-held transmitter FMH2S-wr for calling systems in

conjunction with the wireless universal indicator FUA63LED has a pure

white rocker with red lettering and a grey carry strap.

*The bottom of the housing is matt.