Modular device for DIN-EN 60715 TH35 rail mounting.

2 modules = 36mm wide, 58mm deep.

The 12V DC power supply is provided by a switching power supply unit SNT12-12V DC that is

only 1 or 2 modules wide. With a power consumption of 12W or 24W, it can also power actuators

as a rail mounted device.

The length of the 230V transmission line between the input Powernet connector and the

repeater can be up to 300 metres. It is dependent on the contact resistance of the intermediate

connections and the cable layout. The repeater also lengthens the distance by up to 300 metres.

Up to 10 FPZ12SO devices can be taught-in for up to 30 meters. Two connected FPV12 devices

require no teach-in since the rotary switch settings are sufficient for this.

Up to 24 consecutive incoming wireless telegrams are buffered and pushbutton signals are

transferred as first priority. Transmission takes place in compliance with CENELEC B in the range

from 95 to 125KHz at up to 2.5Kbps.

The

green LED under the bottom rotary switch accompanies the teach-in process according to

the operating instruction and indicates incoming Powernet telegrams in operation by blinking

briefly.