The glass panel with aluminium housing is equipped with 24 capacitive sensor buttons and 24 status LEDs. The panel enables the control of switching, dimming and push-button functions as well as light scene and value transmitter functions. The LEDs can be separately parameterised to be illuminated in green, red or blue to signalise different situations of the KNX installation. Single sensor buttons, full columns or the entire panel can be blocked with blocking functions. Acoustic signals when pushing the sensor buttons can be parameterised. The surface can be labelled with exchangeable labelling foils, which can be labelled with the JUNG labelling software. The MBT 2424 will be installed into a 2-gang wall box with a protection level of IP 54. Programming takes place via ETS. A drilling template and a bit for assembling will be delivered with the device. Product characteristics
Switching, dimming, push-button and blinds control, value transmitter and light scenes
High quality glass surface with 24 sensor buttons
Operation via touching the sensor buttons
Labelling with exchangeable labelling foil
Status feedback with 24 LEDs in 3 different colours
Acoustical feedback for touching sensor and alarm signals
Dismounting message possible
Logic and time functions
Blocking functions
Integrated BCU
Supply via separate power supply (accessory) or the auxiliary voltage output of the KNX power supply
Technical data
External power supply
Rated voltage:
AC/DC 24 V SELV
Power consumption:
approx. 2.2 W
Connection, power supply:
connecting terminal yellow/white
single wire:
0.6 ... 0.8 mm2
Dimensions (W x H x D):
front plate approx. 236 x 156 x 14 mm
Installation depth:
approx. 38 mm
Ambient temperature:
–20 ... +70 °C
Storage/transport temperature:
–20 ... +75 °C
Relative humidity:
15 ... 95 % relative humidity (r. h.), no condensation
