DCM Camera interface 1-gang (flush-mounted)

for cameras

The interface is used for connecting cameras to the DCM video system.
Standard video devices (AV output, video line output etc.) with F(BAS) output can be connected to the interface input (75 Ω, asymmetrical).
The video source must provide an FBAS (composite video) signal with negative synchronization (international standard). This will be converted into a 2-wire video signal for the DCM installation.
The integrated 12 V / 250 mA power supply can be used for the camera.

Technical data
Rated voltage:		DC 24 V (power supply and control unit)
Input current:		I_a-terminal: 0 mA at rest I_P-terminal: 17 mA without load
Max. input current:		I_Pmax: 300 mA
Integrated power supply for camera:		DC 12 V, max. 250 mA
Output level of 2-wire video signal:		–3 dB ... 9 dB, manually adjustable
Video input (asymmetrical):		FBAS signal 75 Ω, 0.7 ... 2 V_ss
Video output (symmetrical):		100 Ω, 1 V_ss
Max. video output voltage:		3 V_ss at 100 Ω load
Permissible ambient temperature:		–20 ... +50 °C
Dimensions (W x H x D):		52 x 52 x 23 mm

product (empty)

No products

Shipping £0.00
Total £0.00