Intended use

• For the integration of analogue telephone systems into the JUNG door communication
• Indication of door calls with telephone systems
• Answer door calls with the telephone
• Trigger control functions with the telephone

Product characteristics

• Interface for the integration of telephone systems via analogue a/b port

• Up to 16 telephone numbers with max. 16 digits can be used

• Connects outdoor and indoor stations with the telecommunication network

• Input for a floating contact

• Input can trigger a connection to a separately assigned telephone number

• Communication to 3 outdoor stations via the telephone

• Communication to 3 indoor stations via the telephone

• Up to 10 control functions can be released via the telephone

• Day-/night switch over

• Call diversion

• Potential-free output, make/break contact 24 V DC / 1 A, switch ON time adjustable

Please note:

• For commissioning and operation the device must be connected to the analogue port of a telephone system or directly to the outside line.
• For commissioning a telephone for transmitting of DTMF-tones is required.
• The telephone system must transmit the DTMF-tones of a telephone to the analogue port within the speech signal.
• The used button commands must not be used or blocked by the telephone system itself.
• DTMF-tones may not configure the telephone system or release any special function.
• The telephone system must allow internal calls without special characters.