DCM Power supply and control unit

For video installations with one line
only in combination with DCM power supply extension http://www.knxcenter.com/dcm-supplementary-devices/342-dcm-power-supply-extension.html

Rail mounting device, 4 rail units

Only in combination with DCM power supply extension ref.-no.: TK SV 2500 REG for installations with max. 2.5 A permanent load.

Door release function with integrated power supply:
12 V, 50/60 Hz (door release unit ≥ 6 Ω)
Light switching with floating relay contact
(make contact, DC 24 V / 1 A)
Door release time from 0.8 s up to 8 s manually adjustable
Turn-off delay for floating contact from 0.8 s up to 5 min manually adjustable
Line and P-terminal are short circuit protected
Push-button for programming mode
Status/programming LED

Technical data
Input voltage:		AC 230 V ~ ± 10 %; 50/60 Hz
Rated input current:		I_N = 0.2 A
Output current a-terminal:		I(a) = 40 mA
Output current P-terminal:		I(P) = 60 mA
Max. loop resistance:		20 Ω
Permissible ambient temperature:		0 ... +40 °C
Electromagnetic compatibility:		according to EN 50 081 and EN 50 082-2
Radio interference suppression:		according to EN 55 011

product (empty)

No products

Shipping £0.00
Total £0.00