Connection to EAM 4000: a) via KNX b) 230 V from enclosed power supply The TC Plus is mainly developed for an analogue telephone network. Optional it can be used also via an analogue port of an ISDN unit. The TC Plus is an alarming and remote switching device by which up to 6 conventional devices can be switched via telephone. All settings will be saved in case of a power failure – except for time and date. The behaviour of the outputs in case of a power failure can be set (after return of the power voltage: ON, OFF or restoring the switching state before the power failure). Conventional relays or current-impulse switches can be connected to the switching outputs. Furthermore, the TC Plus is sending messages to selected participants (cf. phone numbers). These messages are activated by up to 6 contacts (series) which are connected to the alarm inputs (N1 to N6). At each of the inputs break or make contacts can be installed. Additionally, when connected to KNX, up to twenty communications objects can be controlled and up to 6 alarms can be processed. Should given messages – send off by the alarm inputs M1 to M6 or by KNX – not be confirmed, a local alarm output will be switched. The controlling will either be performed with a DTMF telephone (DTMF = Dual-tone multi-frequency) or with a DTMF pocket dialer (optional). In case of an answering machine being used at an analogue connection (AB mode), either the answering machine or the TC Plus can be addressed. The TC Plus is operated by turnkey. Operation is supported by plain texts on a 20 character 4 line alphanumeric LCD field and also by announcements. The user can choose among 6 display languages for the messages.
The following versions are available on request:
TC Plus KNX ISDN Recommended if only ISDN connections are available and the ISDN telephone system has neither analogue ports nor ISDN terminal adapters. The TC Plus ISDN can be connected directly to the S0-bus.
TC Plus KNX GSM Security and convenience is possible even without having a landline. The TC Plus GSM requires only a SIM card.
TC Plus KNX analogue REG Rail mounting device, 8 rail units
Technical data
Dimensions (W x H x D):
204 x 251 x 49 mm
Weight:
approx. 610 g
Colour:
RAL 7035, light grey
Rated voltage:
plug power supply Input: AC 100 ... 240 V ~, 50/60 Hz Output: DC 12 V / 1.2 A alternative: external 12 V DC power supply
Protection level:
IP 30 acc. to DIN 60 529
Operating temperature:
–5 ... +45 °C
KNX:
Bus Interface Module BIM 113
6 signalling inputs
for floating make contacts or break contacts
6 switching outputs
12 V DC, 100 mA
1 local alarm
12 V DC, 100 mA total max. rating of all outputs max. 700 mA, short circuit proof and surged with 200 mA
