Analogue actuator module, 4-gang

Analogue actuator module, 4-gang

Rail mounting device, 4 rail units

Extension module for analogue actuator 4-gang ref.-no.: 2204.01 REGA
Function

The analogue actuator module extends a KNX analogue actuator 4-gang by four additional sensor outputs.
The analogue output extension module offers four analogue outputs which can be software parameterised for one of the following ranges.
Outputs not used can be deactivated.
Voltage signals: 0 ... 1 V DC 0 ... 10 V DC
Current signals: 0 ... 20 mA DC 4 ... 20 mA DC

Technical data
Power supply
	Supply voltage:	AC 24 V ~ ± 10 %
	Current consumption:	max. 120 mA
	Current consumption at system connector:	6 mA
Ambient temperature:		–5 ... +45 °C
Storage/transport temperature:		–25 ... +70 °C
Humidity
	Ambient/storage/transport:	max. 93 % r. h., no condensation
Mounting width:		72 mm (4 rail units)
Weight:		approx. 155 g
Terminals
Outputs, power supply:		screw terminals
	single wire:	0.5 ... 4 mm²
	stranded without ferrule:	72 mm (4 rail units)
	stranded with ferrule:	0.5 ... 2.5 mm²
Connection KNX device:		KNX bus connection block
Analogue outputs
	Number:	4
	Ranges:	0 ... 1 V DC, 0 ... 10 V DC, 0 ... 20 mA DC, 4 ... 20 mA, DC
	Voltage signal load:	≥ 1 kW
	Current signal load:	≤ 500 W

product (empty)

No products

Shipping £0.00
Total £0.00