Home>KNX>Actuators for rail mounting >Fan coil actuator 2-gang

Fan coil actuator 2-gang

Fan coil actuator 2-gang

Fan coil actuator 2-gang

Rail mounting device, 4 rail units
with manual electronic operation and LED status indication
Only with the ETS 3.0d version or later versions the full functionality will be available.
ETS product family: Heating, A/C, Ventilation
Product type: Fan-coil

More details


£283.22  excl. VAT

FCA2REGHE


Notify me when available

Product characteristics

  • Connection of a fan coil unit with up to 6 fan stages or connection of fan coil units with up to 3 fan stages respectively
  • Manual output control, provisional operation
  • Control options for heating, cooling or combined heating/cooling operation
  • 2-pipe or 4-pipe operation
  • Individual or hierarchical switching of fan stages
  • Feedback
  • Output state indication
  • Disable function for each channel


 
Modes of operation

  • Bus operation: operation via touch sensors or room controller
  • Temporary manual control: manual operation locally with keypad, automatic return to bus operation
  • Permanent manual control mode: only manual operation locally on device


 

 

 

 

Technical data   
KNX supply: DC 21 ... 32 V SELV 
Power consumption KNX: typical 150 mW 
Rated voltage: AC 230/240 V ~, 50/60 Hz 
Power loss: max. 3 W 
Ambient temperature: –5 ... +45 °C 
Storing temperature: –25 ... +70 °C 
Connection, KNX: bus connection block 
Connection, mains and outputs: screw terminals 
  single wire: 0.5 ... 4 mm2 
  stranded without ferrule: 0.5 ... 4 mm2 
  stranded with ferrule: 0.5 ... 2.5 mm2 
Switch type: make contact 
Contact type: floating relay contacts (μ contact) 
Switching voltage: AC 230/240 V ~ 
Breaking capacity AC1: 10 A 
Breaking capacity AC3: 10 A 
Switching capacities per output   
ohmic load: 2300 W 
capacitive load: 10 A / max. 140 µF 
Motors: 1380 VA 
Lamp loads:   
  Incandescent lamps: 2300 W 
  HV halogen lamps: 2300 W 
  LV halogen lamps with:   
  – conventional transformer: 1200 VA 
  – TRONIC transformer: 1500 W 
  Fluorescent lamps:   
  – non-compensated: 1000 W 
  – parallel compensated: 1160 W / 140 µF 
  – lead-lag circuit: 2300 W / 140 µF 
Approvals: VDE

 

Cart  

No products

Shipping £0.00
Total £0.00

Cart Check out

TeamViewer for Remote Support Remote Support