Heating actuator, 6-gang

Heating actuator, 6-gang

Rail mounting device, 4 rail units
6 outputs "TRIAC"
ETS product family: Heating, A/C, Ventilation
Product type: Valve

Intended use

Product characteristics

Switching operation or PWM operation
Actuators with characteristics opened or closed without power
Overload-protected, short circuit-protected
Protection against jamming valves
Forced position
Various setpoints for forced position or emergency operation in case of bus failure for summer or winter
Cyclical monitoring of the input signals can be parameterized
Feedback via bus, e.g. in case of mains failure, overload or sensor failure

Technical data
Rated voltage:		AC 230/240 V ~, 50/60 Hz
Power loss:		approx. 2 W
Ambient temperature:		–5 ... +45 °C
Storage/transport temperature:		–25 ... +75 °C
Heating outputs
	Contact type:	semiconductor (triac), ε
	Switching voltage:	AC 230/240 V ~
	Switching current:	5 ... 50 mA
	Switch-on current:	max. 1.5 A (2 s)
	Number of drives per output:	max. 4
Mounting width:		72 mm (4 rail units)
Connection, mains and outputs:		screw terminals
	single wire:	0.5 ... 4 mm²
	stranded without ferrule:	0.5 ... 4 mm²
	stranded with ferrule:	0.5 ... 2.5 mm²
Rated voltage KNX:		DC 21 ... 32 V SELV
Power consumption KNX:		max. 125 mW
Connection, KNX:		terminal
Approvals:		VDE

product (empty)

No products

Shipping £0.00
Total £0.00