The electronic requires no intrinsic power supply, so there is no standby loss.

The wireless outdoor brightness sensor FAH60 powered by a solar module covers the range

from 0 to 30000 Lux. From approx. 300 Lux, it transmits a wireless telegram to the Eltako

wireless network every time there is a brightness change of more than approx. 500 Lux within

approx. 10 seconds.

If the brightness does not change, a control signal is sent approx. every 100 seconds.

New actuators FSR and FSB can cover the range from 0 to approx. 30 Lux using the twilight

switch function. A wireless telegram is sent about every 100 seconds within this range.

Starting in production week 28/2011:

To teach-in in an actuator in teach-in mode, hold the supplied

blue magnet or any other magnet at hand below the point on the side panel of the sensor marked

by