This battery-powered smoke alarm is a reliable device that generates an alarm in case of fire
by visual detection based on the scattered light principle. Certified to EN 14604:2005 by the
VdS (German independent testing institution). Alarm signal produces loud tone at intervals
of 0.5 second. Operation indication every 40 seconds by flashing red LED. Fault and battery
change display by short alert tone every 40 seconds.
In case of an alarm, the inserted wireless transmitter module transmits an NO contact telegram
to the Eltako wireless network. This also takes place when the test button is pressed.
While the alarm sounds, the telegram is repeated after 1 second and then every 0.5 seconds
up to a pause that increases to 20 seconds. Power consumption during an alarm is 3.3mA
from a fitted 9V lithium battery that powers the smoke alarm.
When the alarm is cancelled, an NC contact telegram is sent and it is repeated after 100ms.
After this, the wireless transmitter module consumes no more power.
Product highlights (manufacturer specifications)
Early, reliable fire detection by automatic evaluation sensor system
High operating reliability through sophisticated automatic self-test of entire electronics and
separate power measurement
Low battery is signalled visually and acoustically for 30 days
The alarm is equipped with a soiling meter and display in compliance with UL standards
Faults signalled by loud 85dB warning tone in case of alarm
Proof against false alarm due to powerful measuring chamber and consideration of
temperature fluctuations (not a temperature smoke alarm)
Light transmission bar (LED) acts as 'alarm mute test button'
'Alarm memory' function. This indicates which HDv 3000 OS smoke alarm was triggered in
the past 24 hours
Wireless-based alarm signal forwarding
Approved by VdS (test centre) for fitting in habitable recreational vehicles
Scope of supply includes smoke alarm, detector base, user manual, 9 V lithium battery and
2 screws and rawl plugs for mounting the alarm
FRW-
