Modular device for DIN-EN 60715 TH35 rail mounting. 2 modules = 36mm wide, 58mm deep.

The wireless transmitter module F8S12-UC has eight channels and, like wireless pushbuttons,

it can transmit local and central control signals into the Eltako wireless network.

4 control inputs may be connected to different potentials since they are electrically isolated.

Control voltage 8 to 253V AC or 10 to 230V DC.

A 12V DC voltage is supplied from a switching power supply unit SNT12-12V DC which has a

width of only 1 module.

If two pushbuttons are defined as direction switch, the two pushbuttons must be taught-in

as direction switches in an actuator. Control inputs are then defined in pairs for the direction

'ON', 'central ON', 'UP' and 'BRIGHTER' and control inputs 'OFF', 'central OFF', 'DOWN' and

'DARKER': A1/A3, A4/A5, E1/E3, E4/E5.

The LED flashes once when a wireless signal is transmitted.

Control current at 8/12/24V AC/DC: 2.5/4/9mA.

Control current at 230V AC/DC (<5s): 5(100)mA.